Search
Description

Double-roll winding machine КР 261-200 01 «UNIKOM» is used for mechanized rewinding of cable in case of execution of round-trips on wells with drowned centrifugal pumps in oil and natural gas industry.

The products are used for use in common with Downhole Armored Flat Cables with cross-section from 10 till 35 mm2 or similar, wound around coils of diameter from 1700 till 2200 mm, of total weight of not more than 8 tons.

Winding machine is used for long-term mode of operation out of three-phase alternating-current mains of frequency of 50 Hz with dead-earthed neutral and voltage of 380 V.

Climatic version – Cold Temperate Climate, category of placement in case of operation I under GOST (State Standard) 15150-69.
 
Main technical characteristics of КР 261-200.01 are given in the table.

Double-roll winding machine КР 261-200 01

Article: КР 261-200 01
Characteristic Index
Number of turns of cable coil, turns/min4
Average speed of winding, m/sec0,25
Electric motor power, kW4
Speed of rotation of electric motor, turns/min1450
V-belt transmission with gear ratio1/2
Diameter of reel with cable, mm 1700-1800
Weight of reel with cable, not more, kg8000
Overall dimensions, mm, not more (Lenght/Width/Height)4690/2282/2538
Weight of product (without reel), kg1729 ±10%
If you want to order or have any questions?