1. Purpose of the storage tank with a volume of 10-25 m³.

     The tank is used as a tank-tank for the preparation, storage and refilling of process fluids or special compositions during technological operations for well maintenance or repair work.

2. Climatic version of the storage tank.

     Operation in climatic areas with moderate cold climate according to GOST 16350-80, climatic version UHL1 according to GOST 15150-96 (-60°... +45°C).

3. The composition of the storage tank:

     The tank volume from 1 m3 to 25 m³ consists of several parts:

• Capacity of steel 09G2S or capacity-thermos of polyethylene on a unique multi-layer spiral technology;
• lines of filling and delivery of technical liquid with shut-off valves and quick-release connections;
• the sensor(s) with a scale division of 0.2 m³;
• the main tunnel or a collapsible ladder for lifting on a service platform with handrails;
• internal access hatch with working ladder and trapdoors;
• steam pipe heating from PU, electric heating system with oil-filled high-efficiency heaters capacity or heating cable explosion-proof performance in insulation outside;
• if necessary, operation in cold climates can be insulated with polyurethane foam or other insulation option;
• possible insulation and pipes collapsible line manifold;
• it can be installed on a two-axle chassis (modification 8301) of a tractor or automobile trailer with the required number of pairs of frame jacks to ensure stability and safety of work, as well as on a frame-sled or other support according to The customer's Specifications.
• can be combined on one basis with other equipment (for example: with drilling (gutter) capacity; with mobile tool unit; with pump unit; with filter equipment, etc.).

4. Advantages of storage tank

- All capacities are made with the maximum account of all requirements of the Customer, considering manufacturability and practicality of their further operation for convenience of work with them.

-  High-quality anticorrosive coating of internal and external surfaces is produced by experienced qualified specialists in the paint chambers in accordance with the technology for the required operating conditions.

-  Insulation with polyurethane foam ensures the preservation of heat inside the container for a longer time than in a container with another option of insulation. It is possible to insulate containers with materials according to the Customer's preference.

-  Installation of high-efficiency heaters of explosion-proof design (or heating cable) ensures the maintenance of heat inside the tank and energy savings.

- Installation on the chassis of automobile or tractor trailers makes the capacity mobile and more convenient to operate.
- They are equipped with reliable cleaning hatches of the "canadian" type, which facilitates and accelerates the technological processes of maintenance.

- Containers-thermoses made of polyethylene by a unique multi-layer spiral technology with interlayer reinforcement are in great demand due to their unique properties, lightweight weight characteristics, unpretentiousness in everyday use (service life of more than 50 years!).

     In order to order and buy containers, You can contact the sales Department and we will offer the most suitable option for you and calculate its cost.