The appointment of an oil trap.
The oil trap is intended for cleaning storm sewage from oily substances, serves for separation of oil products from water in drains of the industrial enterprises, car washes, gas stations, Parking lots, sites of roads and streets.
The use of oil traps.
The oil trap is used where the concentration of harmful substances of petroleum products in sewage storm water is high, mainly it:
- car refueling station;
- Parking Lots, Parking Lots, Garages;
- Car wash;
- Industrial enterprise
As a rule, before the oil trap, a sand trap is installed to pre-clean the water surface from sand and other similar particles in structure.
The oil trap has a lot of advantages:
- corrosion resistance-plastic is practically not subject to the negative effects of corrosion;
- ease of further maintenance;
- ease of construction, which makes it easy to transport, install the device;
- long term uninterrupted operation.
If the treated wastewater is sent back to the reservoirs, then they are subject to increased requirements, so the treatment should be more thorough. To improve the quality of effluents, a special additional sorption post-treatment unit (in other words, it is called a sorption filter) is used.
Technological characteristics of the oil trap:
|Consumption, liters / second||Diameter D, m||Length L, m||Diameter of inlet / outlet Pipe N, mm||Location of the well S, mm||Weight, kg|
Department of the direction of sales of polyethylene products: Garbuz Denis Gennadievich
Contacts: Tel.: +7 (343)304-64-64 (extension 312)