Winding machine КР 261-100Ш 03 «UNIKOM» is used for mechanized rewinding of cable in case of execution of round-trips on wells with drowned centrifugal pumps in oil and natural gas industry.

The products are used for use in common with Downhole Armored Flat Cables with cross-section from 10 till 35 mm2 or similar, wound around coils of diameter from 1700 till 2200 mm, of total weight of not more than 8 tons.

Winding machine is used for long-term mode of operation out of three-phase alternating-current mains of frequency of 50 Hz with dead-earthed neutral and voltage of 380 V.

Climatic version – Cold Temperate Climate, category of placement in case of operation I under GOST (State Standard) 15150-69.

Main technical characteristics of КР 261-100Ш 03 are given in the table.