news of factory
From 19 to 21 November 2014 specialists Of the group of companies "UNICUM" took part in the international specialized exhibition "NIZHNEVARTOVSK. OIL. GAZ-2014".
At the stand of the company "Unicom" was presented the capacity of HDPE, made by a unique technology, extrusion method (a detailed description and advantages of tanks, we told in the previous news).
This development aroused great interest of visitors of the exhibition, the company's stand was visited by over a hundred representatives of different oil and oil service companies.
...In view of the significant interest of Oil (chemical)service industries and enterprises of the region of KHMAO-Yugra and YANAO, using capacitive equipment for storage, preparation and transportation of aggressive liquids, LLC "ZNPO Unicom" invites you to get acquainted with a new type of polyethylene containers for storage of aggressive liquids (including acids) at the specialized exhibition "Nizhnevartovsk. Oil. GAZ-2014 "19, 22 November from 10: 00 to 18: 00 at the address: Nizhnevartovsk, Lenin str., 7, "Palace of Arts".
For specialists, the capacity of technological ET 25 Will be presented.OP "Unicom" of low-pressure polyethylene (HDPE), made by a unique technology, extrusion method. On the eve of the exhibition, specialists of GC "Unicom" and partners conducted tests of containers manufactured by this technology in the field, where their advantages were revealed:
- HDPE is chemically neutral, so the tanks are suitable for storage, preparation and transportation of acids, oils, diesel fuel and other corrosive liquids;
- Have high ring rigidity (for capacity ø2m, volume 18m3-10 KN / m2), reliability, durability at operation in heavy conditions, including the Far North;
- High impact strength, thanks to the cellular structure of the walls of the container, even at low temperatures provides resistance to damage, as well as resistance to ultraviolet radiation guarantee a long service life of the capacitive equipment without damaging the material and the appearance of " aging effect»;
- Tanks made of three-layer polyethylene with a thermal conductivity coefficient (W / (m*K)) 100 times lower than that of steel have frost resistance up to-70C without loss of mechanical properties, and the applied technical solution in the manufacture of equipment (cellular wall design) allows the use of tanks and reservoirs in the far North, without additional insulation.
- When using additional heating, electricity costs are much lower (for 25m3 capacity of HDPE enough 5kW, while for 25m3 capacity of metal requires up to 15kW);
- HDPE has durability and resistance to destruction factors for more than 50 years;
- In the capacity of HDPE excluded the formation of scale, so in the production process does not require additional filtration of liquids.
Thus, three-layer polyethylene tanks manufactured by ZNPO Unicom have significant advantages over similar tanks made of sheet metal of low-carbon steels, especially in terms of price-quality ratio and service life.
If you are interested in HDPE tanks, you can at any time convenient for you, visit the "Plant of oilfield Equipment Unicom" in Pervouralsk for the presentation of a new type of polyethylene tanks and familiarization with the products and technologies used at the Plant.
Our managers will tell you more about us by phone: (343) 304-64-64, or send applications to the address: unikom2001@mail.ru
...GC "UNICUM" has successfully manufactured for the Russian leader in the production of drilling rigs LLC "Uralmash NGO holding" capacitive equipment that provides uninterrupted fuel supply diesel-electric drilling rig manufactured for OJSC "Surgutneftegaz".
Representatives of the Department of external acceptance of LLC Uralmash NGO holding noted the high level of production and excellent quality of the manufactured equipment.
...Specialists of GC "Unicom" developed and produced a three-axle flatbed trailer of increased cross-country capacity, designed for transportation of various cargoes weighing up to 16 tons.
The Unicom company successfully carries out development and development of the non-standard equipment, satisfying needs of the customer.
...Unicom group of companies has launched a line for the production of capacitive equipment made of spiral polyethylene (PE) and polypropylene (PP) pipes.
Main advantage:
Capacitive equipment made of PE and PP spiral tube has significant advantages over tanks and tanks made of sheet metal of low-carbon steels.
1. PE capacitive equipment without additional internal coating is applicable for work:
- With oil, gasoline, diesel fuel, oils and other hydrocarbon-based products, alcohols and other organic solvents.
- With concentrated hydrofluoric, hydrochloric, nitric acids, Halogens, fluorine and chlorine with concentrations below 50%.
2. The coefficient of thermal conductivity W/ (m*K) PE is 193 times lower than that of steel, as well as high frost resistance PE up to-700C (not higher-1200C according to GOST), without loss of mechanical properties and the applied technical solution in the manufacture of equipment, allows the use of tanks and reservoirs in the far North, without additional insulation. Also, if you need to heat the working fluid, it is possible to complete the heating equipment.
3. Due to the properties of PE and PP, pipes have high rates of elongation at break, which gives them the ability to withstand significant loads not taken into account in the initial design calculations (in case of man-made accidents and natural disasters).
4. Capacitive equipment made of low-pressure polyethylene grades PE 100, has a durability and resistance to failure factors up to 50 years.
Basic technical data:
| Characteristic | Indicator |
| Working volume, м3 | from 5 to 100 |
| Total weight of dry container, not more than, т. | from 2 |
| Overall dimensions of round containers, mm; Length: Diameter: Overall dimensions of square containers, mm; L х W х H: |
from 0' 000 to 18'000 600, 2'000, 3'000 from 0'000 to 18'000 х 2'100 х 2'100 |
| The estimated service life, years | up to 50 |
Capacitive equipment made of polyethylene (PE) and polypropylene (PP) —
high-quality alternative to existing technologies!
Since August 27, 2014, at any time convenient for You, we invite you and your specialists to visit the plant of Oilfield Equipment "Unicom" for the presentation of a new type of tanks for the needs of Your companies.
And also get acquainted with the products and technologies used in our company.
Phone for appointment: (343) 304-64-64
Plant "UNIKOM" has won the tender of JSC "NOVATEK" for the manufacture and supply of "Site preparation of killing fluid" for the arrangement Yarudeyskoye field for a trial period.
...In may 2014, specialists of the company "Unicom" developed a new model of cable roller with a cut-off, designed to descend through it into an oil or gas well armored power cable. The design of the roller provides cable cutting in case of emergency. The new model differs from the previously produced rollers in a round shape, as well as a simpler and more reliable design. At the moment, the roller is being tested at the Unicom plant, after which it will be sent directly to the consumer for further operation.
The Unicom company successfully carries out development and development of the non-standard equipment, satisfying needs of the customer.
...
