News
Specialists of GC "Unicom" developed and produced a three-axle flatbed trailer of increased cross-country capacity, designed for transportation of various cargoes weighing up to 16 tons.
The Unicom company successfully carries out development and development of the non-standard equipment, satisfying needs of the customer.
...Unicom group of companies has launched a line for the production of capacitive equipment made of spiral polyethylene (PE) and polypropylene (PP) pipes.
Main advantage:
Capacitive equipment made of PE and PP spiral tube has significant advantages over tanks and tanks made of sheet metal of low-carbon steels.
1. PE capacitive equipment without additional internal coating is applicable for work:
- With oil, gasoline, diesel fuel, oils and other hydrocarbon-based products, alcohols and other organic solvents.
- With concentrated hydrofluoric, hydrochloric, nitric acids, Halogens, fluorine and chlorine with concentrations below 50%.
2. The coefficient of thermal conductivity W/ (m*K) PE is 193 times lower than that of steel, as well as high frost resistance PE up to-700C (not higher-1200C according to GOST), without loss of mechanical properties and the applied technical solution in the manufacture of equipment, allows the use of tanks and reservoirs in the far North, without additional insulation. Also, if you need to heat the working fluid, it is possible to complete the heating equipment.
3. Due to the properties of PE and PP, pipes have high rates of elongation at break, which gives them the ability to withstand significant loads not taken into account in the initial design calculations (in case of man-made accidents and natural disasters).
4. Capacitive equipment made of low-pressure polyethylene grades PE 100, has a durability and resistance to failure factors up to 50 years.
Basic technical data:
Characteristic | Indicator |
Working volume, м3 | from 5 to 100 |
Total weight of dry container, not more than, т. | from 2 |
Overall dimensions of round containers, mm; Length: Diameter: Overall dimensions of square containers, mm; L х W х H: |
from 0' 000 to 18'000 600, 2'000, 3'000 from 0'000 to 18'000 х 2'100 х 2'100 |
The estimated service life, years | up to 50 |
Capacitive equipment made of polyethylene (PE) and polypropylene (PP) —
high-quality alternative to existing technologies!
Since August 27, 2014, at any time convenient for You, we invite you and your specialists to visit the plant of Oilfield Equipment "Unicom" for the presentation of a new type of tanks for the needs of Your companies.
And also get acquainted with the products and technologies used in our company.
Phone for appointment: (343) 304-64-64
Plant "UNIKOM" has won the tender of JSC "NOVATEK" for the manufacture and supply of "Site preparation of killing fluid" for the arrangement Yarudeyskoye field for a trial period.
...On 7 June, the "UNIKOM" plant celebrated the fourteenth birthday
On June 11, at the solemn line in honor of the 14th birthday, the results of the past year were summed up, plans for the current and future periods were announced, and workers of labor dynasties were awarded.
Long known that the success of an enterprise depends not only the power of machines or shipments of finished products, but also the employees of the plant. At the same time, family dynasties are a special indicator of stability, in which experience and skills are passed from generation to generation. Labor dynasties have always been a sign of stability, strong corporate spirit of the enterprise, its social unity.
Linked by ties of kinship, employees try not to drop the honor of family, to "keep the brand". Hence-diligence, responsibility, diligence and integrity.
For 14 years of work the enterprise "Unicom" has grown significantly. Intensive development, stable performance, care for employees have borne fruit, and today there are already established dynasties among The company's employees. As a rule, a father or mother brings their children to the enterprises, this is a common situation, but there are also such examples when representatives of the older generation, looking at the young, join a friendly team. Now in Unicom from 330 people who work at the enterprise, 49-representatives of family labor dynasties.
Special words of respect as always awarded to the workers noted in the nomination "10 years together", their number is growing every year and has 11 people.
The passing pennant "Best production unit of the year" is awarded to the machine shop in addition to a huge cake.
All the winners of the sports festival held on the eve also received their awards, and the winners of the family relay were awarded on June 7 in the sports complex of JSC "Dinur". Children jumped on the trampoline, had fun with clowns, Aqua makeup, soap bubbles and balloons! Sports prizes were also given to everyone who took part in the children's drawing contest " Sport-health-Unicom!»
...In may 2014, specialists of the company "Unicom" developed a new model of cable roller with a cut-off, designed to descend through it into an oil or gas well armored power cable. The design of the roller provides cable cutting in case of emergency. The new model differs from the previously produced rollers in a round shape, as well as a simpler and more reliable design. At the moment, the roller is being tested at the Unicom plant, after which it will be sent directly to the consumer for further operation.
The Unicom company successfully carries out development and development of the non-standard equipment, satisfying needs of the customer.
...In April 2014, the specialists of the company "Unicom" developed a new model of cement mixer driven by a diesel internal combustion engine and a hydraulic drive to rotate the paddle agitators. The hydraulic drive of the mixer allows you to manually set different speeds of rotation of the agitators.
Using a diesel engine allows you to work in the field in the absence of an external power source.
Low consumption of diesel fuel of the engine significantly reduces the cost of cattle crews for repairs.
The Unicom company successfully carries out development and development of the non-standard equipment, satisfying needs of the customer.
...